Product Range

CT701 Door Contact - Universal Device

Door Contact

The Door Contact Models CT 701 are battery operated, wireless door contacts designed for use in VIDEOFIED® security systems.

Door contacts are intended for use in detecting the opening and closing of doors, windows, or cabinet doors/drawers. Read more >

The CT 701 consist of a switch detector with S 2View® spread spectrum, VIDEOFIED® , interactive, encrypted wireless circuitry for secure two-way communications with the control panel. A dual tamper function provides detection for both wall and cover tamper. The transmitter is typically installed on the stationary surface of an opening (door frame or window frame), while the magnet is installed on the door or window. With the door or window closed, the magnetic field forces a reed switch inside the detector to close, creating a secured condition. When the alarm system is armed and the door or window is opened, the detector transmits an open signal. The control panel receives this signal and responds according to system configuration/programming. The external input terminals accepts a normally closed remote switch. You can also connect a dry closed circuit (no power) from standard hardwire intrusion or smoke/heat detectors. An internal jumper selects the sensors mode of operation, whether the internal reed switch, external input, or both are active. The detector is powered by one lithium battery that can last up to four years, depending on the amount of detector activity. The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current alarm state, tamper conditions, serial number, date of manufacture, software version and battery status.

S2View® - Spread Spectrum, VIDEOFIED ®, Interactive, AES Encrypted Wireless technology provides optimum signal integrity and security.
Supervised - transmits a check-in/status signal every 8 minutes indicating open/closed state, tamper conditions, serial number, date of manufacture, software revision and battery status.
Dual tamper - provides detection for both wall and cover tamper.
External input - accepts normally closed (NC) dry (no power) circuits from standard hardwire intrusion devices, including fast response devices.
Three working modes: internal reed switch only, external input only, internal switch and external input. > Lithium battery - up to four years.
Two colors - available in white or brown.

Installation/Mounting
Detector One screw secures detector to base; two screws secure detector to mounting surface. Magnet Two screws secure magnet assembly to mounting surface. Spacing Maximum 10mm (3/8) in gap between detector and magnet.

Electrical Data
Power requirements One 3.6 V battery Battery type Lithium, LS14500 Battery life Up to 4 years RF technology S2View® Radio type Spread Spectrum Bidirectional RF Operating frequency 920 MHz Transmission security AES algorithm encryption Supervision Polled signal every 8 minutes Antenna Integrated Tamper detection Wall and cover tampered External terminal input type Normally closed (NC) Working modes 1-internal reed switch only 2-external input only 3-internal switch and external input Mode selection Jumper wire on 3-position terminal block Maximum external wire length 16 m Operating temperature 0°/+40°C Maximum relative humidity 70%, non-condensing Approvals CE / EN50131 / EN300220 / INCERT/ IDA / NCP (CT201/211) FCC (CT601/611) A-Tick (CT701/711)

Physical Data
Material Plastic: ABS-ULV0 Magnet Alnico 5 Dimensions m m3 2x m m5 3x m m0 8(LxWxD): Detector: 3 1/8 in. x 1 3/8 in. x 1 in. Weight: Detector 40 g/1.4 oz. -without battery